There are a variety of things that a homeowner has to do to maintain his property, a few of them more frequently than others. For example, draining the water heater just has to be done annually, changing furnace filters every few months, watering the lawn every few days in the summer and trimming the trees maybe every two or three years. These are simply a few things on a lengthy list of maintenance needs on every home. One thing that must be done in many areas of the country at least two or three times in the fall is cleaning the leaves out of the rain gutters. This is certainly not enjoyable work. Water will start to break down the leaves so that a sludge is created, which can be a problem. On top of that, there is the fact that the rain gutters are affixed to the roof. This type of work would be intensive when done at ground level, but it is worsened when a homeowner needs to drag a ladder along and climb up and down over and over to get to rain gutters. Fortunately, someone determined there had to be a better way to go and invented the idea of gutter protection.

The theory with using gutter protection is that it helps to keep things from getting into the gutter to begin with, thus you can avoid having to clean them out. All sorts of stuff aside from leaves can get into your gutters although leaves are by far the biggest threat. But toys, newspapers, litter, and lightweight trash like plastic bags are easily thrown or blown up onto your roof over the course of a year. And anything that stops the flow of water down your rain gutters is a much more serious problem for your home than you might be aware.

Obviously, the idea of rain gutters is that all the water flows down the gutters and then down the spouts where it is supposed to be directed away from your foundation. When rain gutters and spouts fill with leaves that turn to sludge, along with other debris, rain and melted snow will end up in places where you don’t want to, which causes damage As an example, if it is winter and the gutters are loaded with half-melted snow, it provides an excellent place for ice dams to form and this can do serious damage to your roof and gutters. This is merely one way that having blocked gutters can damage your home in a big way.

You will need to have professionals come to your residence to install the gutter protection, however, this is an investment in your home’s value that will benefit you. For one thing, you will not be required to balance on top of a rickety ladder and pull moldy wet leaves out of the gutters. You also don’t have to watch the fall of the gorgeous leaves as the weather turns colder and dread the ritual of having to pull them down from there.

You made the decision to build a chain link fence. You have the posts set. You even figured out how to get the rail ends on and have the top rail in place. Now its time to put the bottom tension wire on. No matter how hard you try or how hard you pull the wire, you just cant seem to get it taut.

The common cable used as bottom tension cable on chain link fencing is a 9 gauge galvanized wire. It usually comes in rolls of 170? or more. The wire is thick, heavy, and is difficult to stretch. Here is a simple way to tighten the wire, and all you need is a pair of pliers. Start by attaching one end of the wire at a terminal post (also known as an end post or corner pole). Put the wire through the brace band and wrap it around its self a few times. It is not recommended to try and pinch the wire in the brace band to secure it. Reel the cable out along the fence line.

Cut the cable a couple feet past the next terminal post you are securing it to. Walk the fence line again and make sure the tension wire has no kinks, is not caught on any roots or under growth, and get out as many of the loops (caused by it being spooled) as you can. Take the free end of the tension cable and thread it through the brace band at the terminal post you are going to attach too. Pull the cable as tight as you can get it, and wrap it around itself a few times as you did at the first pole.

The wire should be fairly tight, but may push away from the poles about a foot. Tighten your brace bands. Take your pliers (lineman pliers work best) and grab the tension cable with the pliers by either one of the terminal poles. With a firm grip, twist the pliers to the left or right. The tension cable will form a z were you twisted. Work your way down the fence line twisting the tension wire in this matter at every pole.

You will notice the farther you work down the line, the harder the wire is to twist. This is due to the wire getting tighter and less slack being able to be twisted. Put as many twists in the wire as needed to achieve the tension you desire.

This is a simple way to tighten bottom tension cable and make sure the bottom of your chain link fence is secure.

Find out more about chain link fence and other fence materials Go to: http://www.sefencellc.com